歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-常見問題

常見問題

超聲波清洗機中超聲波振蕩器的維護有哪些需要注意的？

作者：admin來源：http://m.dijiushangdian.cn/時間：2020-11-06

超聲波清洗機中超聲波振蕩器的維護有哪些需要注意的？目前市場上的超聲波振蕩器主要用于大型水質凈化設備和各種超聲波清洗設備，在應用超聲波后廣泛應用于各種工業消耗、精細儀器清洗和家庭生活中，停止溶液攪拌，從而停止對所需項目的清洗和消毒。那么，當我們停止對超聲波振子的日常維護時，應該注意哪些成果呢？

What should be paid attention to in the maintenance of ultrasonic oscillator in ultrasonic cleaning machine? At present, the ultrasonic oscillator on the market is mainly used for large-scale water purification equipment and various ultrasonic cleaning equipment. After the application of ultrasonic wave, it is widely used in various industrial consumption, fine instrument cleaning and family life. It stops the solution mixing, so as to stop the cleaning and disinfection of the required projects. What should we pay attention to when maintaining the ultrasonic oscillator?

一，側風口清潔。高評價的超聲波振蕩器在底部和側面有一個特殊的噴口，以保證儀器任務中無效的散熱，因此超聲波振蕩器的側風口能否被清潔，排氣和熱排放是否被延遲，將間接影響整個儀器的清洗效果和工作安全性。頻繁工作的超聲波振蕩器應該每兩個月清洗一次。

1、 The side air outlet is clean. The highly evaluated ultrasonic oscillator has a special nozzle at the bottom and side to ensure ineffective heat dissipation in the instrument task. Therefore, whether the side air outlet of the ultrasonic oscillator can be cleaned and whether the exhaust and heat emission are delayed will indirectly affect the cleaning effect and work safety of the whole instrument. The frequent working ultrasonic oscillator should be cleaned every two months.

二，過熱維修。為了避免在任務中因過熱而損壞儀器部件，質量好的超聲波振蕩器將在儀器外面安裝特殊的過熱維護和安裝，但如果操作人員發現在使用超聲波振蕩器的過程中出現異常加熱，還應及時關閉電源并對加熱原因進行反思，以免因過熱維護和安裝而對儀器造成損壞。

2、 Overheat repair. In order to avoid damage to the instrument components due to overheating during the task, the high-quality ultrasonic oscillator will be installed with special overheat maintenance and installation outside the instrument. However, if the operator finds abnormal heating in the process of using the ultrasonic oscillator, the power supply should be turned off in time and the heating reasons should be reconsidered to avoid damage to the instrument due to overheated maintenance and installation.

三，清洗劑清空。當使用超聲波振蕩器停止清洗物品時，大量的人會加入一定量的酸堿清洗劑以提高清洗效果，但清洗劑在打開很長一段時間后會釋放揮發性酸或堿性氣體，形成對儀器外部的腐蝕，因此超聲波振蕩器應在一次性使用后及時清空其外部儲存清洗劑。

3、 The cleaning agent is empty. When the ultrasonic oscillator is used to stop cleaning articles, a large number of people will add a certain amount of acid-base cleaning agent to improve the cleaning effect. However, after the cleaning agent is opened for a long time, volatile acid or alkaline gas will be released to form corrosion on the external of the instrument. Therefore, the external storage of cleaning agent should be timely emptied after the ultrasonic oscillator is used for one time.

總之，應注意側風口的電流停止清洗，注意儀器的過熱維護，停止超聲波振蕩器的日常維護時及時清空清洗劑。超聲波振蕩器具有良好的售后服務，具有更完善的清洗功能和較好的清洗

In short, attention should be paid to the current of the side tuyere to stop cleaning, pay attention to the overheat maintenance of the instrument, and timely empty the cleaning agent when stopping the routine maintenance of the ultrasonic oscillator. Ultrasonic oscillator has good after-sales service, with more perfect cleaning function and better cleaning

上一篇：光學超聲波清洗機利用超聲波產生的3種效應！
下一篇：超聲波清洗機工作可以進行除銹嗎